SANMONK Drip Irrigation Kit, 100 Feet 149 PCS DIY Irrigation Pipe Automatic Irrigation Spray Perfect Irrigation System Equipment Garden Watering Kit Suitable for Flower Beds Patios Greenhouse Plants

Installation steps:
 
1. Cut the tube as needed.
 
2. Connect the tube to the flat ball head.
 
3. Connect the tube to the atomizing nozzle.
 
4. Connect the tube to the T-connector.
 
5. Cut a tube to connect the drip emitter.
 
6. Connect the pipes with quick connectors.
 
7. Connect the 3/4 inch (about 1.9 cm) faucet or universal adapter to the faucet
 
Prompt:
 
1. The faucet is preferably a faucet with an external thread of the washing machine. If not, please choose a faucet with an outer diameter of no more than 20 mm and connect it to the universal faucet connector. You can choose two faucet connectors to connect the water source perfectly.
 
2. Using freshly boiled blisters, cut the water pipes at each end for about 30 seconds, and then easily connect them.
 
3. If possible, use a faucet to connect, otherwise the rubber hose may slip off when the high pressure is high.
 
Package:
 
1*4/7 capillary 30 meters(100ft) water pipe
30 * Little red riding hood dropper with adjustable dropper
20 * Orange nozzle with adjustable dropper
1 * 2 ways  Hose Spliter
2 * Tubing Quick Connection
1*Threaded Faucet Connector
30 * Support Stakes
30*3-way Tee Connector
2*End Cap
10*Single Connector
20*4MM Flat Tee Connertor
1*Teflon Tape
Parcel Dimensions ‏ : ‎ 31.8 x 23.4 x 10 cm; 970 Grams
Date First Available ‏ : ‎ Sept. 16 2020
Manufacturer ‏ : ‎ SANMONK
ASIN ‏ : ‎ B08YVTFNR2

🔦Wide Range of Applications: The automatic irrigation kit is suitable for all desired locations, such as watering pool balcony cooling facilities, vegetable garden, lawn atomization, mist cooling system, dust control, humidification of garden.
🚿Easy to Use: The integrated drip system can be installed in just 15 minutes, no digging or plumbing skills are required. The end of the primary water pipe uses an adapter instead of a plug to make full use of the water pipe and reduce more problems. This system is a good helper for home irrigation garden.
🍀Automatic Irrigation: It works automatically, delivering water directly to the plant roots, self-irrigation system eliminates the worry about forgetting irrigation or unattended. You don’t have to water it every day. In addition, the water flow of drip emitter head can be individually adjusted, allowing to set each plant to receive its customized watering according to its precise needs.
🌾Note: Put the tube head into hot water for 10-15 seconds before assembling, which will help soften the tube, allow it to be connected more firmly, and avoid leakage or blowing out. In order to balance the water pressure, the transmitter should be adjusted closer to the faucet, and the water flow should be adjusted to a smaller water flow.