Zozozo Bob Stroller Tire Tube – Rear Inner Tubes Replacement for Bob Jogging Strollers [16 inch x 1.75 x 2.125] Revolution Flex Pro Se Strides & All Duallie

Made to fit all BOB jogging strollers, including the following models:

• Bob Revolution Flex 3.0
• Bob Revolution Flex 3.0 Duallie
• Bob Revolution Pro
• Bob Revolution Pro Duallie
• Bob Revolution Flex 2.0
• Bob Revolution Flex 2.0 Duallie
• Bob Stroller Strides
• Bob Stroller Strides Duallie
• Bob Revolution Flex 2.0 Lunar
• Bob Revolution Se

Get back on the jogging path as quickly and easily as possible with our replacement tubes for BOB jogging strollers.
Replacing your tube shouldn’t take more than five minutes. You’ll need a couple things: screwdriver (flat-head) and tire pump.
Follow the directions below to replace your rear stroller tire tube. You’ll also find these on your box packaging!

1. Size: make sure tube size [16 inch x 1.75 to 2.125] matches tire size (found on tire wall).
2. Remove Wheel: carefully remove the wheel completely from the stroller. This may require a flat screwdriver or two to pry off tire wall.
3. Out with the Old: unscrew the old tube valve and remove tube entirely from tire.
4. Pokey Check: run your fingers through tire interior to make sure no sharp objects remain.
5. Line Tire Edge: place one edge of the tire over the tire rim; leave other half hanging off.
6. Mini Inflate: slightly inflate the tube with a few pumps so that it takes shape.
7. In with the New: match up the tube valve with the valve hole and line the new tube within the tire.
8. Line Other Tire Edge: fit the other edge of the tire completely inside the tire wall.
9. Just Add Air: inflate to the recommended pressure shown on your stroller tire then add valve cap.
10. Replace Tire: add tire first… then baby 🙂

Feel free to reach out with any questions or troubles when replacing your tube. We want to help!