GFFG Drip Irrigation Kit, 100 Feet 93 PCS DIY Irrigation Pipe Automatic Irrigation Spray Perfect Irrigation System Equipment Garden Watering Kit Suitable for Flower Beds Patios Greenhouse Plants

Installation steps:
 
1. Cut the tube as needed.
 
2. Connect the tube to the flat ball head.
 
3. Connect the tube to the atomizing nozzle.
 
4. Connect the tube to the T-connector.
 
5. Cut a tube to connect the drip emitter.
 
6. Connect the pipes with quick connectors.
 
7. Connect the 3/4 inch (about 1.9 cm) faucet or universal adapter to the faucet
 
Prompt:
 
1. The faucet is preferably a faucet with an external thread of the washing machine. If not, please choose a faucet with an outer diameter of no more than 20 mm and connect it to the universal faucet connector. You can choose two faucet connectors to connect the water source perfectly.
 
2. Using freshly boiled blisters, cut the water pipes at each end for about 30 seconds, and then easily connect them.
 
3. If possible, use a faucet to connect, otherwise the rubber hose may slip off when the high pressure is high.
 
Package:
 
1*8/12 capillary 15 meters (50ft)water pipe
1*4/7 capillary 15 meters(50ft) water pipe
20* 3 Baebed Tee Pipe Connector  
10 * Red dropper: adjustable dropper
10* Mister Nozzle
10* Barbed Fitting for end
10*Driper
20* Nyion Cabie Ties
5* 4 Baebed Pipe Connector
1* Universal Connector
1 * Pacifier
1* Garden Hose Socket
1* Pife Seal Tape
2* Tail Plug
Parcel Dimensions ‏ : ‎ 26.5 x 19.4 x 15.1 cm; 1.87 Kilograms
Date First Available ‏ : ‎ Nov. 10 2020
Manufacturer ‏ : ‎ GFFG
ASIN ‏ : ‎ B08YD4G2ND

Garden Irrigation System: The drip irrigation kit is suitable for an area of 25-30 square meters. You can design different irrigation schemes according to your plant needs.
Water Saving: Compared with traditional spray and water droplets, it can save up to 70% of water, making your system very suitable for storing water under dry conditions, saving water and saving money!
Wide Range of Applications: Irrigation systems are very suitable for irrigation of flowers, plants, bonsai, potted fruits or other plants, such as homes, gardens, containers, greenhouses, hotels, clubs, offices, flower beds, agriculture and vegetables.
Note: Put the tube head into hot water for 10-15 seconds before assembling, which will help soften the tube, allow it to be connected more firmly, and avoid leakage or blowing out. In order to balance the water pressure, the transmitter should be adjusted closer to the faucet, and the water flow should be adjusted to a smaller water flow.